Starter Control Boxes for 4" Motors

Applications:

• QD-These control boxes are designed for use with Franklin 3-wire single-phase submersible motors through 0.75kW
• Standard-These control boxes are designed for use with Franklin 3-wire single-phase submersible motors from 1.1 to 3.7 kW. Recommended for water systems that use standard/heavy-duty pressure switches, level switches or other pilot devices

Basic Features:

• Heavy Duty Box-Type Terminals
• External Access to Overload Resets
• Multi-size Knockouts
• User-friendly Connection Diagrams
• Easy Access to Grounding Lugs

Reco-starters

Who do I get to fix this?

When you are 100’s of miles away from a major city and your electronic starter won’t turn on your pump and it’s over 30 degrees and your cattle are thirsty your local electrician looks at the starter and states he knows nothing about electronic’s. if the starter had been one of our Reco-Starters then your standard electrician could of fixed it and you would be pumping in a very short time.

It was designed with “ it’s an oldie but it is a goodie”

VSD and Soft start starters

Soft start starters are used where you have a specific need for a start cycle time, one of the major reasons is to limit the current as the supply line is not capable of handling full start up loads therefore this can be a cheaper option then upgrading supply lines.
VSD starters can do the above but they also have the capacity to run your motor and pump unit at variable speeds to suit the amount of output at the pump as needed. In some situations it is used to save electricity costs and also can be used to bring in other pumps on-line as the usage increases, many town water suppliers now use multiple pumps to meet the peek demand and only run minimum pumps when demand is low.

• Sensor less Vector Control
• 150% Starting Torque
• Built-in PLC Functions
• LED/LCD Keypad Display
• NPN/PNP Digital Input
• PID Function
• Braking Transistor built-in
• Copy Unit (Memory pack) Function
• PC (Windows) / PDA (WinCE) Link Function
• RS-485 Modbus RTU / ASC11 mode
• Field Bus Communication Modules (Option)
  • Profibus-DP
  • DeviceNet
• EMC Filter Built-in
• Global Standards: UL, cUL, CE

Start delta starters

• The easiest and simplest starting method for a three phase motor, when using to start a submersible motor a six wire lead motor is nee11KW to 55KW

• AC3 (Induction Motor Starting) Rating

• 415 Volt 50Hz 3 Phase, coils rated 415 Volt

• Adjustable Switch Over Timer

• Cable Entry Knockout  Top and Bottom

• Other Overloads available for Special Motor Ratings (Retrofit an Overload that suits the Load

• Other Voltages Available (Retrofit coils that suits the Voltage)

Pumptec

What is Pumptec?

• Protection Features Remote Control Features
• Dry Well (Under load) Over & Under Load Settings
• Over & Under Voltage Over & Under Voltage Settings
• Rapid Cycle Reset Time Settings
• Bound Pum Sensitivity & Timeout Adjustments
• Fault History (Last 15 Faults) Load
• Indicator Lights
• System Status Monitor Other Features
• Voltage Heavy Duty Relay
• Status 115V/230V 60/50Hz Operation
• Alarm Circuit Contacts

Pumptec Plus

• Push Button Calibration
• Run and Fault Indicator Lights
• Heavy Duty (30A) Contactor
• Works with PSC, Split-phase CSCR and CSIR motors

Sub Monitor

Features

• Quick setup to monitor and motor
• Digital display indicates voltage and current on all three legs at the same time
• One unit covers the entire range from 190 to 600 Volts
• Password Protection
• Stores fault, setting changes, and pump run-time, that can be accessed through the display
• Detachable display unit can be mounted on panel door

Sub cable

There’s water in my cable.

EPR is the only cable you should be putting down into your bore as this is made with rubber over rubber as the  outside protection, this will not let any water into the copper cable. Giving you and your motor the best protection. Normal PVC wire or orange circular as used in housing and construction will allow water to enter over a period of time, and we have seen on many occasions damage to the motor or starter, so only use EPR for your best protection.

To improve the life and performance of submersible pump systems DEPS has developed a unique PVC rising main using Australian made UPVC pipe and manufacturing this into a product that can be used for pumping systems that are corrosive or aggressive on the life of steel components.

 This systems offers you a greater efficiency thus lowering  head loss and a longer life as PVC is resistant to corrosive properties.

 Oxide build up is reduced as the rising main is flush and smooth on the inside.

All the above leads to a cost effective product that will make your job as a pump installer easier

Applications

Permanent groundwater control projects

Water supply

Irrigation applications

Agricultural applications - water supply

Mining sites - dewatering, water supply

Advantages

Non Corrosive

Light weight

Low cost of installation

Ease of dismantling

Resistance to Iron Oxide

Left hand threaded will not undo on start up torque

Stainless pump adaptors in BSP thread

Rising Main Components

Steel or Stainless Steel

Rising main to pump Adaptors - BSP threads or Specials can be manufactured to suit all types of Pumps and Brands

Flexibore Rising Main

Flexibore rising mains has been specifically designed to replace rigid riser pipes made from steel and PVC, which due to their rigidity, are generally heavier and hard to handle. Steel pipes suffer from rust and encrustation's and also have to contend with internal scaling. Over time this seriously reduces flow rates and pump efficiency. Other risers made from PVC can be brittle or bend. It is fantastic when used in bore testing situations.

Flexibore has been approved for Potable water receiving a AS4020 approval.

• Keeps transportation costs down because it can be compactly stored in transit to site
• Lightweight
• Ease of installation & retrieval
• Corrosion fee - no encrustation's to impair the efficient flow of water over a long lifetime
• Compatible with most submersible pumps
• Bore hole depths of up to 250m can be pumped

• 100% corrosion resistant
• Quick and easy installation and retrieval
• Reduced head losses and improved flow rates due to swelling under pressure
• Less labor intensive due to ease of installation
• Reduced transport costs due to light weight and easy handling
• Custom lengths made to order
• Potable water approved: AS 4020
• All hydrostatically tested

Steel Rising Main

Steel rising main is a effective material for rising main especially when going the pump setting is very deep.
Steel pipe rising main can come in a couple of forms this are-
1: Threaded M/F flush in Sch 40 steel pipe
2: threaded both ends male and using a female threaded socket
3: flanged both ends and joined by bolts and a fitted gasket.
4: Galvanized threaded pipe with malleable socket.

These are a quick and simple well head that will connect  to your rising main what ever pipe material that you use.

The have a female threaded BSP socket .

They are corrosion prove plated.

These can be manufactured in Stainless if specially needed

These are manufactured in our premises in high quality steel and painted or you can have them Galvanized.

The can also be manufactured to suit any connection to your rising main but the are manufactured specially to suit our PVC rising main.

They have specific holes in this plate for your electric cable and safety cable to come out of the bore, thus sealing the bore so foreign material cannot fall into your bore.
Stainless steel can be used if you have a specific need.

Safety Cable

Stainless safety cable is used in case there is a unforeseen  chance that a problem occurs with the rising main or pump, so by using a safety cable you can winch the pump back to the surface instead of fishing it out from the bottom.

Be sure to match the size of cable to the pumps weight.

Pump shroud

PVC shrouds are needed to keep the water velocity over the motor  at the correct limit to ensure the submersible motor is running  within the correct temperature specifications. They are designed to join to a length of PVC pipe that will fit over the motor and fit into the bore.